For some, the mere idea of painting a room strikes fear into their very heart. It conjures up visions of yards and yards of that infamous blue tape, and gallons of paint tipping over beautifully cleaned carpets on accident. Yes, we have all had painting mishaps, but it's not as overwhelming as it may sound. Here are some simple ways to get started when you are considering painting a room.
- Get your supplies (and double check them): There's not much worse than beginning an enormous project only to keep making trips to the hardware or paint store! Gathering them at the beginning helps immensely. Here's a shortlist of the items you need: paint (obviously!), paintbrushes and rollers, painters tape (get the brand name kind that peels off easily, such as Scotch blue), a small container for paint that you can easily hold (like a tupperware), paint trays, stirrer sticks, gloves, spackle material for any small holes, dropcloths (and regular, cheaper masking tape to affix them to the floor). We also recommend rags, paint remover, and paper towels, as well as a trash bag or can.
- To calculate how much paint you may need, the general rule is 400 square feet per gallon. It is wise to get additional paint, in case you spill any, or you need more to cover a tough color like red. If you are using a very large amount of paint, it is recommended to mix two gallons together it in a 5 gallon bucket to prevent variances in color from being very obvious when you change buckets.
- Make sure you have adequate ventilation, including fans: Wear a mask if you need to, and be sure to open windows/doors to avoid breathing in paint fumes. Many paints these days are fume-free or low-odor, but you may still get a headache from being in a cramped area and painting. Work from the top down, so paint the ceiling first.
- If you are up on a ladder, us a small bucket or container: Going up and down a ladder is certainly not a pleasant experience, and also wastes a ton of time. Pour your paint into a smaller bucket to do trim and more detailed painting, rather than walking around over and over. We recommend using a brush along trim and to "cut in" (the first strokes along the edges), and then swapping to a roller to cover more ground.
For more tips, be sure to check out our post about choosing a paint color HERE!